POS

CODE

DESCRIPTION

PHOTO

2.01

33-T0070/A

Compaction Mould Complete With Base Plate And Extension Collar,4” 101.6 Mm Dia X116.43 Mm High conforming to ASTM and AASHTO standards

2.02

33-T0075

2.5kg Compaction rammer, drop regulated to 304.8mm ASTM

2.03

33-T0076

4.535kg compaction rammer, drop regulated to 457.2mm ASTM

2.04

34-T0099

Straight edge 300 mm long

2.05

       33-T8702

33-T0087/8A

33-T0087/7

33-T0087/6

33-T0087/B

Electric vibrating Kango Hammer fitted with steel tamper (BS1377) and Shank 300 mm long with support frame

2.07

33-T0071/A

Compaction mould complete with base plate and extension collar,152.4mm dia x 116.43mm height conforming to ASTM and AASHTO standards

2.08

86-D1306/4

Galvanized sample tray 1m x 0.5m x 75mm deep

2.09

86-D1680

Flat bristle brush 75 mm wide

2.10

11-D0630/30

30000 g cap.x 0.5g resolution, digital balance, under balance weighing facility, RS 232 serial output, battery [rechargeable] and mains operated complete with traceable calibration certificate. 230-110V/50-60Hz/1ph, adapter included plus specific gravity frame.

2.10

WEIGHTS

1. 11-D0709/C

2. 11-D0700/C

3. 11-D0701/C

4. 11-D0702/C

5. 11-D0703/C

6. 11-D0704/C

7. 11-D0705/C

8. 11-D0706/C

9. 11-D0707/C

10. 11-D0708/C

Set of weights, 1mg to 50g, Class M1, 20 in total

50 g calibration weight class M1

100 g calibration weight class M1

200 g calibration weight class M1

500 g calibration weight class M1

1 Kg calibration weight class M1

2 Kg calibration weight class M1

5 Kg calibration weight class M1

10 Kg calibration weight class M1

20 kg cast iron calibration weight. Class M1,

tolerance +/- 1 g

2.11

15-D3470/J

20mm BS sieve,300mm diameter

2.12

82-D1231

Digital stop watch

2.13

10-D1390/25

Forced convection laboratory oven with digital thermoregulator and 2 shelves. 250 l capacity. 220-240V/50-60Hz/1Ph

2.15

86-D1329

Moisture tin,90mm diameter 20mm deep,cadmium plated or aluminium alloy

2.16

22-T0029/E

Cone penetrometer with gauge, Penetration cone and automatically controlled test cup both BS Liquid limit and asphalt penetration

2.20

22-T0040/2

Glass comparator -Stainless steel rod dia 3 mm

2.21

22-T0040/1

Glass plate

2.22

86-D1172

Evaporating Dish 150mm dia x 45mm depth

3.01

86-D1305/2

Metal container (450mm dia.)

3.02

86-D1305/1

Stainless steel tray, 305mm diameter 50mm deep

3.03

35-T0125/A3

Metal tray with 150mm diameter hole in the centre,300mm x 300mm square or equivalent area,400mm deep

3.04

35-T0126/3

Metal tray with 200mm diameter hole in the centre,500mm x 500mm square,50mm deep

3.05

35-T0126/P

Steel pegs for fixing tray in position

3.06

35-T0125/A1

Sand pouring cylinder,150mm diameter

3.07

35-T0126/1

Sand pouring cylinder 200 mm dia

3.08

35-T0147

Cold steel chisel 20mm x 300mm long

3.09

99-T0147/1

Cold steel chisel 10mm x 250mm long

3.10

35-T0145/G

Club hammer

99-G1200

7 LB Sledge Hammer

35-T0144

Rubber mallet 50 mm dia

3.11

86-D1602

Scoop for removing excavated material from hole,250mm long handle

3.12

99-G0291

Paint Brush 100mm

3.13

99-G0290

Paint Brush 50mm

3.14

Primus gas stove

3.15

35-T0125/A2

Calibration can 150 mm dia

3.16

35-T0126/2

Calibration can 200 mm dia

4.  DENSITY TEST (NUCLEAR DENSITY METHOD AASHTO T238)

4.01

35-G3430/PU

Nuclear Moisture density Gauge Standard Version with 300mmx25mm Source Rod Complete with accessories; Guide and Scraper Plate

4.02

35-G3440/3

Hole forming Device(drill rod)

5.  CBR (AASHTO T193)

5.01

34-T0106

50kN CBR Load frame complete with stabilizing bar (electric and hand operated)

5.02

34-T0103/1

CBR penetration piston including bracket

34-T0104/7

Adjustable dial gauge holder

5.03

82-D1256

Penetration gauge range 0-25mm travel x 0.01mm divisions

5.04

82-T1009

Proving ring for  50kN capacity CBR Load frame

5.05

82-T1007

Proving ring for above of 28kN capacity

5.06

28-WF6453

Proving ring for above of 10kN capacity

82-T1000/9

Adapter for connecting a WF load ring, 1 to 10 kN cap., to the upper crossbeam of CBR/Marshall, Multispeed and Uniframe 50-100 kN testers.

5.07

34-T0090/A

CBR mould,152.4mm dia. x 178mm high, complete with perforated base plate and extension collar 50.8mm high that can be fitted to either end of the mould

5.08

34-T0092

Perforated swell plate 150mm dia. With an adjustable centre post of rustproof metal provided with a lock nut

5.09

34-T0093

Swell tripod

5.10

82-D1255

Swell dial gauge

5.11

34-T0095

2.27kg slotted surcharge weight

5.12

34-T0094

Annular surcharge weight 2.27 kg

5.13

34-T0097/A

Solid base plate for CBR mould

5.14

16-T0080

Central extruder,complete with 29kN hydraulic jack and accessories

5.15

34-T0091

34-T0091/1

34-T0091/B

Spacer disc [61.4 mm high]

Spacer disc, UNE, NF.

Compaction plug with handle

5.16

Soaking tank for CBR mould sufficient to hold at least 50 moulds

6.  SPECIFIC GRAVITY FOR AGGREGATES

6.01

11-D0612

200mm dia. Wire mesh basket with apertures not greater than 6.5mm large enough to contain 2.5kg of aggregates

6.02

11-D0611/3

A stout watertight container in which the basket can be freely

6.03

86-D1692

Absorbent cloths 750x450 mm [pack of 3]

6.04

86-D1305/4

Shallow tray of area not less than 0.065m2

6.05

86-D1528

An airtight container of similar capacity to the basket

6.06

48-D0441/A

Pycnometer 1 litre cap. for sands and fine

aggregates

6.07

11-D0630/6

Electronic automatic 5kg balance accurate to 0.1g to be of size and type to permit the basket containing the sample to be suspended in water (to be supplied with weights)

7.  SIEVE ANALYSIS

7.01

15-D3415/J

300 mm dia ISO[BS] sieve op.75mm perf. plate

15-D3420/J

300 mm dia ISO[BS,NF,DIN] sieve op.63mm perf.plate

15-D3430/J

300 mm dia ISO[BS,NF,DIN]sieve op.50mm perf. plate

15-D3440/J

300 mm dia ISO[BS] sieve op.37,5mm perf. plate

15-D3450/J

300 mm dia ISO[BS,NF,DIN]sieve op.28mm perf. plate

15-D3460/J

300 mm dia ISO[BS,NF,DIN]sieve op.25mm perf. plate

15-D3475/J

300 mm dia ISO[BS] sieve op.19mm perf. plate

15-D3470/J

300 mm dia ISO[BS,NF,DIN]sieve op.20mm perf. plate

15-D3485/J

300 mm dia ISO[BS,NF,DIN]sieve op.14mm perf. plate

15-D3495/J

300 mm dia ISO[BS,NF,DIN]sieve op.12,5mmperf.plate

15-D3505/J

300 mm dia ISO[BS,NF,DIN]sieve op.10mm perf.plate

15-D3510/J

300 mm dia ISO[BS] sieve op.9,5mm perf. plate

15-D3530/J

300 mm dia ISO[BS,NF,DIN]sieve op.6,3mm perf.plate

15-D3540/J

300 mm dia ISO[BS,NF,DIN]sieve op.5mm perf. plate

15-D3545/J

300 mm dia ISO[BS] sieve op.4,75mm perf. plate

15-D3550/J

300 mm dia ISO[BS,NF,DIN] sieve op.4mm perf. plate

15-D3004/J

Lid and Receiver for 300 mm dia sieves

15-D2185/J

200 mm dia ISO [BS,UNI,NF,DIN] sieve op.2,00 mm

15-D2210/J

200 mm dia ISO [BS] sieve op.1,18 mm

15-D2215/J

200 mm dia ISO [BS,UNI,NF,DIN] sieve op.1,00 mm

15-D2240/J

200 mm dia ISO [BS] sieve op.600 microns

15-D2240/J

200 mm dia ISO [BS] sieve op.600 microns

15-D2245/J

200 mm dia ISO [BS,UNI,NF,DIN]sieve op.500 microns

15-D2250/J

200 mm dia ISO [BS] sieve op.425 microns

15-D2270/J

200 mm dia ISO [BS] sieve op.300 microns

15-D2300/J

200 mm dia ISO [BS] sieve op.150 microns

15-D2330/J

200 mm dia ISO [BS,UNI] sieve op.75 microns

15-D2004/J

Lid and Receiver for 200 mm dia sieves

7.03

15-D0407/B

Electromagnetic sieve shaker for sieves up to 315 mm dia. 230V, 50-60Hz, 1ph.

Twelve 200/203 mm,or eight 300/315 mm sieve cap. plus pan and cover- Complete with timer- Usable as vibrating table for concrete specimens and other purposes.

7.04

86-D1306/4

1.2m x 1.2m x 50mm deep galvanized metal tray

7.05

15-D0438/C

Riffle box with 50mm slots

8.  CONCRETE: SLUMP AND CUBE MANUFACTURE (BS 1881)

8.01

54-C0149/E

Slump cone test set including steel cone protectes against corrosion, base plate, steel tamping rod, steel rule and scoop. Conforming to EN and ASTM standard.

8.02

Steel rule

8.03

55-C0101/H

Concrete cube mould 150mm 4 Part Cube Mould To EN12390-1 and BS1881 Part 108. Cast iron construction with base plate.

8.04

55-C0193/A

55-C0193/5

Large curing tank (capacity 50 No. Cubes)

Thermostat heating system for curing tanks.

230V/50-60Hz/1Ph.

8.05

55-C0140/1

Cube Tamping bar 380 mm long x 25 mm square

9.   CONCRETE: CUBE COMPRESSION TESTING

9.01

50-C13A02

Concrete compression machine,to BS 1610 Grade A with 300mm gauge,rectangular platens,capacity 1500kN with load pacer Conforming to ASTM C39, AASHTO T22 for 150x300 mm [6"x12"] cylinders

9.03

200 x 20mm distance piece

9.04

50-C9082

Distance piece dia 200 x 50 mm

9.05

50-C9083

Distance piece dia 200 x 68 mm

9.06

100mm distance piece

50-C0910/FR

100 kN cap. flexure frame complete with rollers, pressure transducer , pedestal and connection kit for separate control console.

AGGREGATE AND CHIPPINGS

9.09

47-T0050/C

Sand equivalent test set conforming to ASTM D2419 and AASHTO T176

 Including: Four measuring cylinders totally graduated, Two rubber stoppers,Measuring can, Irrigator tube, Syphon assembly with bottle, Weighted foot, Funnel, Graduated rule, 1 litre bottle of stock solution, Plastic carrying case

47-T0056/B

Motorised sand equivalent shaker. 230V, 50Hz, 1ph Suitable for both EN 933-8, ASTM D2419 and AASHTO T176

9.0 LAA TEST

9.10

48-D0500/G

Los Angeles abrasion machine conforming to EN and ASTM standards. For CE compliance the machine shall be housed in the proper safety cabinet fitted with opening switch, see accessories models

48-D0500/CB1 and 48-D0500/CB2.

User interface: large size graphic display and membrane keyboard.230V, 50Hz, 1ph.

48-D0505

Set of 12 abrasive charges for LA ASTM/UNI

AGGREGATE AND CHIPPINGS

9.11

48-D0510/U

Standard aggregate crushing value apparatus,supplied complete with cylinder,plunger,base plate,tamping rod and measure

55-C0140

48-D0510/1

Tamping rod dia 16 mm x 600 mm

Spare Pot for ACV

9.12

48-D0515/A

Aggregate Impact testing machine to determine the aggregate impact value(AIV)

9.13

Sodium sulphate test apparatus

9.14

86-D1073

Borosilicate glass beaker 250 ml

9.15

86-D0819

Reagent grade silica gel,500g container

9.16

38-T0184/A11

Tamping rod 8mm dia. x 300mm long and metal measure 115mm dia. x 180mm deep for above(BS812)

48-D0510/1

Spare Pot for ACV

9.0 FLAKINESS (BS 812)

9.17

9.18

9.19

9.20

9.21

9.22

9.23

47-D0415

Flakiness gauge(BS 812)passing 10.0mm retain 6.3mm

Flakiness gauge(BS 812)passing 14.0mm retain 10.0mm

Flakiness gauge(BS 812)passing 20.0mm retain 14mm

Flakiness gauge(BS 812)passing 28.0mm retain 20.0mm

Flakiness gauge(BS 812)passing 37.5mm retain 28.0mm

Flakiness gauge(BS 812)passing 50.0mm retain 37.5mm

Flakiness gauge(BS 812)passing 63.0mm retain 50.0mm

10. TRAY SPRAY AND SPREAD RATE TESTS

10.01

80-B0177

Transverse distribution test of bitumen spray(depot tray test to BS 1707)equipment

10.02

80-B0176

CONTRACTOR

Rate of spread of coated chipping Tray and chains and Calibrated spring balance

10.04

80-B0176/1

Steel tray 306x306x38mm(for measuring bitumen spray rate)

10.05

86-D1554/1

Gunny Sack (Woven Poly Prop) 24x40

10.06

86-D1554

Plastic bag 900 x 450mm x 1000 gauge

10.07

86-D1551

Plastic bag 450 x 300mm x 1000 gauge

10.08

86-D1801

Filter paper 150mm dia. Whatman No. 5 (Boxes of 100)

10.09

Filter paper 400mm dia. Whatman No. 5 (Boxes of 100)

10.10

99-G0110

Filter paper 100mm dia. Whatman No. 5 (Boxes of 100)

10.11

86-D1555/G

Cotton waste (or drying cloth)

10.12

86-D1809

Whatman paper [or equivalent]. No 54 x 400 mm dia medium grade. [pack of 100]

11.  MISCELLANEOUS

11.01

11.02

11.03

11.04

11.05

11.06

11.07

11.08

11.09

11.10

11.11

11.12

11.13

11.14

CONTRACTOR

Gas cylinders 13kg

Padlocks

Plastic jerry cans 20 litre capacity

Paper punch

Stapler with pins

Tray lifting calipers

Laboratory dust coats-Brown

Laboratory dust coats-White

Asbestos gloves

Laboratory gumboots(assorted sizes)

Wheel barrow

Dust pan plus brush

Hand shovel

Pick axe with handle

11.15

86-D1603

Metal scoop,large(120 x 190 x 70mm)cast aluminum handle

11.16

86-D1602

Metal scoop,large(70 x 110 x 40mm)cast aluminum handle

11.17

86-D1623

Garden trowel

11.18

86-D1305/1

Sample tray 306 x 306 x 38mm

11.19

86-D1632

Flexible spatula 200 mm blade

11.20

86-D1630

Flexible spatula 100 mm blade

11.21

15-D4440/J

450 mm dia ISO[BS] sieve op.37,5mm perf. plate

11.22

15-D4470/J

450 mm dia ISO[BS,NF,DIN]sieve op.20mm perf. plate

11.23

15-D4540/J

450 mm dia ISO[BS,NF,DIN]sieve op.5mm perf. plate

11.24

15-D4250/J

450 mm dia ISO[BS] sieve op.425 microns

11.25

15-D4270/J

450 mm dia ISO[BS] sieve op.300 microns

11.26

15-D4330/J

450 mm dia ISO[BS,UNI] sieve op.75 microns

11.27

15-D4004/J

Pan and cover 450 mm dia

11.28

86-D1673/G1

Double ended brass/nylon sieve brush.

11.29

86-D1022

Measuring cylinders plastic with sprout 100ml, 250ml, 500ml capacity.

11.30

35-T0130/2

Glass jar capacity 5 litres with lid

11.31

86-D1355

200 x 200 x 200mm cadmium plated or aluminium tin

11.32

99-70867

Electronic Automatic balance,capacity 1000g accurate to 0.01g

11.33

11-D0630/6

Electronic Automatic balance,capacity 2100g accurate to 0.01g

11.34

11-D0646/GA150

Electronic Automatic balance,capacity 50kg accurate to 0.01g

11.35

11-D0601

Dial-0-gram balance 310g capacity accuracy to 0.1g

11.36

11-D0630/15

Field and laboratory scale with scoop 10000g capacity accurate to 1.0g

11.37

86-D2105

Water still 4 l/h capacity. 230V/50-60Hz/1ph

11.38

99-G0206

Polythene or glass 20 litre storage vessel with tap at bottom

11.39

99-G1203

Stiff Broom and Handle

11.40

82-D1652

Vernier caliper 0-150 mm

11.41

82-D1655/A

Digital caliper, measuring range 0-300mm x 0.01mm

11.42

86-D1180/A

Porcelain soil mortar and pestle dia 125 mm

11.43

22-T0037

Linear shrinkage mould BS 1377

11.44

47-D0542

Average least dimension gauge

11.

22-T0030/F

Liquid limit device with counter ASTM-AASHTO- UNI

22-T0032/AP

Grooving tool ASTM, plastic, pack of 10

11.45

86-D1699

Lockable too box containing:1 pair”Molegrip” 2 x 150mm screw driver,2 x 200mm screw driver,2 x 300mm screw driver,(1 std and 1 ‘Phillips’ star head of each),adjustable spanners 200mm and 300mm,1 pr Round-nosed pliers,1 pair general purpose pliers

11.46

86-D1511

Plastic or metal bucket including lid,10 litres capacity

11.47

86-D1537

Plastic wash bottle 500 ml

11.48

99-G0316

A4 size clipboard

11.49

82-D1201

Mercury thermometer,range-1 de.cent.To 15 deg.cent glass(BS 593)

11.50

82-D1215/1

Minimum and maximum thermometer(BS 692)

11.51

99-D3002/A

Rain gauge calibrated in inches and millimetres. Supplied complete with rainfall chart.

11.52

82-D1208/5

Portable dial thermometer +50oC to +2500C accurate to +-3% with 0.65 long stem

11.54

86-D1342

5 litre capacity steel storage container with leak and rustproof lids for storage of bitumen samples

11.55

10-D1402

Hot plate, 160 mm dia, multiposition switch

230V/50-60Hz/1ph

11.56

86-D1305/3

450mm diameter x 150mm deep metallic karais

11.57

11.58

80-B0185/B

MOT straightedge made in aluminium alloy with pair of measuring steel wedges

11.59

80-B0185/B1

Wooden carrying case for MOT straightedge and related wedges

12.  STANDARD SPECIFICATIONS (COPIES OF EACH OF THE LATEST OF THE FOLLOWING STANDARDS)

12.01

12.02

12.03

12.04

12.05

12.06

12.07

12.08

12.09

12.10

12.11

12.12

12.13

12.14

KS 1725

BS 812, Testing Aggregates

BS 882: 1992, Specification for aggregate from natural sources for concrete

BS 1377: 1990, Methods of testing solis for Civil engineering purposes

BS 1881: Methods of testing concrete

BS 434-2:2006, Bitumen road emulsions

BS EN 1008:2002, Mixing water for concrete

BS 4449: 2005, Steel for the reinforcement of concrete

BS 8666:2005, Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete

BS 5911-200:1994, Precast concrete pipes and ancillary concrete products

BS 8004: Code of practice for foundations

Overseas Road Note 3 (ORN 3), A guide to surface dressing in tropical and sub-tropical countries

Standard Specifications for Transportation Material and Methods of Sampling and Testing (AASHTO) Parts I and II, 14th Edition

Asphalt Institute Standards: MS-2, Mix design methods for asphalt concrete and other hot-mix types

<![if !supportLists]>

13. MARSHALL TEST (ASTM D1559)

13.01

83-B0202/B

Pavement core drilling machine, 6 Hp 4 stroke petrol engine.

83-C0322

Coring bit for 100 mm dia x 400 mm long cores

83-C0312/2

Core extractor dia 100 mm

13.02

76-B0057

Standard Marshall compaction mould complete with 76-B0057/1 base plate, 76-B0057/A2 moulds body and 76-B0057/A3 filling collar

13.03

76-B0057/B5

Specimen extractor

13.04

13.05

76-B0058/AC

Compaction hammer, Compaction pedestal +specimen mould holder conform to ASTM, NF,CNR.

13.06

76-B0033

Breaking head mould /Stability mould ASTM/CNR

13.07

76-B0030/A

Electrical 30 kN Marshall compression testing machine

13.08

16-B0072

16-B0072/HM

Laboratory mixer 10 l cap. 230V/50Hz/1PH

Heating mantle for 10 l cap. bowl. 230V/50-60Hz/1F

13.09

82-T1007

Proving ring 28kN capacity graduated in 0.0025mm

13.10

76-B0034

Flow-meter

13.12

76-B0066/B

Digital circulating water bath 30 litres capacity.  230V, 50-60Hz, 1ph. Conforming to EN 12697-34, ASTM D1559,AASHTO T245

13.13

82-D1206

Thermometer(50℃ to 25℃)50mm dia with 180mm stainless steel stem

13.14

76-B0702

Digital laboratory planetary asphalt mixer, 5 litres capacity complete with mixing bowl and whisk.

76-B0702/HM

Heating mantle for asphalt mixer, 5 liters

capacity series 76-B070x230V/50-60Hz/1F

14.  BITUMEN EXTRACTION TES

a) Cold Extraction Bottle Roller Method, BS 598:102

14.01

11-D0630/6

Electronic top pan balance 4kg capacity

14.02

86-D1612

Flat aluminium scoop 1550 ml cap.

14.03

86-D1623

Steel garden trowel

14.04

35-T0143

Density spoon

14.05

86-D1530

Heat resistant gloves [pair]

14.06

99-C0102/3

Foot pump for pressurizing air -water assemblies unto a maximum of 700kN/m2 and fitted with flexible hose approximately 1.2m long and connector

14.07

99-B0011/1

Steel bottle 600ml capacity with 50mm dia rubber stopper

14.08

99-B0011/2

Steel Bottle for B0011. 2.5L, 125mm diam. With rubber bung

14.09

99-B0011/3

Steel bottle 7000ml capacity with 70mm dia rubber stopper

14.10

99-B0011/5

Flask funnel for fitting to the 7000ml steel bottle with the rim of the funnel retaining sieve 200mm nominal diameter

14.11

75-B0011

Bottle roller compact bench mounted unit designed to rotate two bottles simultaneously about the longitudinal axis

14.12

75-B0017

99-B0017/1

Pressure filter complete with cutting tool for making a hole in the filter paper

Filter paper Whatman no.5 x 270 mm dia. (Box of 100)

14.13

99-B0017/3

Filter funnel to take 200mm nominal diameter sieves /Filler Funnel for B0017

14.14

75-B0024/N

15-D0142/2J

15-D0146/2J

Continuous flow filterless centrifuge 70mm dia. Sieves not included. 230V/50Hz/1Ph.

203 mm dia ASTM sieve No 100 [0.150 mm]

203 mm dia ASTM sieve No 200 [0.075 mm]

14.15

75-B0025/B

Binder recovery apparatus, vacuum pump method. 230V/50-60Hz/1ph

14.16

86-D1060

Volumetric flask 250ml,500ml,1000ml and 2000ml capacity each

14.17

75-B0027/A

Recovery still for Dichloromethane

b)    Hot Extraction Method, BS 598

15.01

75-B0016

10-D1402

Hot extractor complete with steel pot with gasket and gauze container,dean and stark receiver,Liebig condenser and a box of filter paper-whitman No.5 x 400mm did or equivalent

Hot plate, 160 mm dia, multiposition switch 230V/50-60Hz/1ph

16.  COMPACTORS: BS EN 12697-32

16.01

78-PV2522

GYROCOMP gyratory compactor, internal angle of gyration pre-set to 1.16° to AASHTO T312 and ASTM D6925.110-230V/50-60Hz/1ph -Conforming to EN 12697-10, EN 12697-31, AASHTO T312/TP4, SHRP M-002, ASTM D6925-Internal angle factory preset to 1.16 to AASHTO T312/ASTM D6925, adjustable to any other value between 0.7° and 1.4° -Approved as Superpave Gyratory Compactor inU.S.A.-Integrated touchscreen display with real time test graph -Complete with software for test performance,

certificate printout, multiple test elaboration for Superpave mix design

-Complete with Accredia traceable certificate of load, displacement and internal angle

78-PV0252/14

78-PV0250/2

78-PV0250/3

78-PV0250/4

78-PV0250/5

78-PV0250/6

78-PV0250/7

Integrated work top for 76-B0252 with mechanical specimen extruder

Hardened cylinder mould 150 mm dia complete with top and bottom plates.

Distance piece 150 mm dia x 50 mm for low samples

Accessories to compact dia 100 mm specimens. Mould not included.

Hardened cylinder mould 100 mm dia complete with top and bottom plates.

Distance piece 100 mm dia x 38 mm for low samples.

Laboratory air compressor. 220-240V/50Hz/1Ph

16.02

33-T8702

Percentage Refusal Density(PRD)Vibrating hammer compactor complete with shanks,tampers(small and large),6 split moulds,7 base plates, Supporting frame – BS EN 12697-32

17.  CONSUMABLES

17.01

17.02

17.03

17.04

Paraffin wax 10kg

Gas

Trichloroethylene (280kg Drum)

Dichloromethane (270 kg Drum)